2023 Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major
92
Ranked Colleges
1,047
Degrees Awarded
$35,600
Avg Cost*
Students have lots of options to chooose from today when trying to decide which college to attend. At College Factual, we’re committed to helping you make that decision by providing information such as that found in our “Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major” ranking.
In 2021-2022, 3,476 people earned their degree in general materials engineering, making the major the 199th most popular in the United States.
At the master’s degree level specifically, there were 1,047 general materials engineering graduates with average earnings and debt of $58,979 and $43,370 respectively.
This year’s “Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major” ranking looked at 92 colleges that offer degrees in a bachelor’s in general materials engineering. This a ranking of the schools where the largest percentage of students has enrolled in general materials engineering.
Check out our ranking methodology for more information.
One Size Does Not Fit All
Since the program you select can have a significant impact on your future, we’ve developed a number of rankings, including this “Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major” list, to help you choose the best school for you.
In addition to our rankings, you can take two colleges and compare them based on the criteria that matters most to you in our unique tool, College Combat. When you have some time, check it out - you may want to bookmark the link so you don’t forget it.
Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major
The following schools top our list of the Best “Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major”.
Top 25 Most Focused Master’s Degree Colleges for General Materials Engineering
Out of the 92 schools in the Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major that were part of this year’s ranking, New Mexico Institute of Mining and Technology landed the #1 spot on the list. New Mexico Tech is a small school located in Socorro, New Mexico that handed out 10 masters’s materials processing and manufacturing degrees in 2021-2022.
The low undergrad student loan default rate of 1.7% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%. With a undergrad student-to-faculty ratio of 10 to 1, it’s easy to see that the school is committed to helping their undergraduates succeed.
Full New Mexico Tech General Materials Engineering Report
You’ll join some of the best and brightest minds around if you attend California Institute of Technology. The school came in at #2 for the Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major. Caltech is a small school located in Pasadena, California that handed out 12 masters’s materials processing and manufacturing degrees in 2021-2022.
With a freshman retention rate of 99%, the school does an excellent job of retaining its undergraduate students. The impressive undergraduate student-to-faculty ratio of 3 to 1 means that students may have more opportunities to work more closely with their professors than they would at other schools.
Read full report on General Materials Engineering at Caltech
Out of the 92 schools in the Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major that were part of this year’s ranking, Worcester Polytechnic Institute landed the #3 spot on the list. This medium-sized school is located in Worcester, Massachusetts, and it awarded 18 masters’s materials processing and manufacturing degrees in 2021-2022.
With a freshman retention rate of 94%, the school does an excellent job of retaining its undergraduate students. The school has an impressive undergrad student loan default rate. It’s only 0.5%, which is much lower than the national rate of 10.1%.
Read full report on General Materials Engineering at Worcester Polytechnic Institute
You’ll be in good company if you decide to attend South Dakota School of Mines and Technology. It ranked #4 on our 2023 Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major list. Rapid City, South Dakota is the setting for this small institution of higher learning. The public school handed out masters’s materials processing and manufacturing degrees to 9 students in 2021-2022.
The low undergrad student loan default rate of 0.7% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Full SD Mines General Materials Engineering Report
Out of the 92 schools in the Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major that were part of this year’s ranking, Montana Technological University landed the #5 spot on the list. Montana Tech is a small school located in Butte, Montana that handed out 1 masters’s materials processing and manufacturing degrees in 2021-2022.
The low undergrad student loan default rate of 2.8% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read full report on General Materials Engineering at Montana Tech
Stanford University came in at #6 in this year’s edition of the Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major ranking. Located in Stanford, California, this fairly large private not-for-profit school handed out 56 diplomas to qualified masters’s materials processing and manufacturing students in 2021-2022.
With a undergrad student-to-faculty ratio of 5 to 1, it’s easy to see that the school is committed to helping their undergraduates succeed. With a freshman retention rate of 98%, the school does an excellent job of retaining its undergraduate students. The school has an impressive undergrad student loan default rate. It’s only 0.2%, which is much lower than the national rate of 10.1%.
Full Stanford General Materials Engineering Report
Cornell University ranked #7 on this year’s Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major list. Ithaca, New York is the setting for this large institution of higher learning. The private not-for-profit school handed out masters’s materials processing and manufacturing degrees to 43 students in 2021-2022.
The school has an impressive undergrad student loan default rate. It’s only 0.4%, which is much lower than the national rate of 10.1%. The school has an excellent freshman retention rate of 97%, which means students like the school well enough to return for a second year. The impressive undergraduate student-to-faculty ratio of 9 to 1 means that students may have more opportunities to work more closely with their professors than they would at other schools.
Full Cornell General Materials Engineering Report
Colorado School of Mines ranked #8 on this year’s Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major list. Golden, Colorado is the setting for this medium-sized institution of higher learning. The public school handed out masters’s materials processing and manufacturing degrees to 18 students in 2021-2022.
With a freshman retention rate of 91%, the school does an excellent job of retaining its undergraduate students. The undergrad student loan default rate at the school is 0.5%, which is quite low when compared to the national default rate of 10.1%.
Read more about General Materials Engineering at Colorado School of Mines
Lehigh University came in at #9 in this year’s edition of the Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major ranking. Lehigh University is a medium-sized school located in Bethlehem, Pennsylvania that handed out 5 masters’s materials processing and manufacturing degrees in 2021-2022.
The school has an impressive undergrad student loan default rate. It’s only 0.4%, which is much lower than the national rate of 10.1%. With a freshman retention rate of 94%, the school does an excellent job of retaining its undergraduate students. With a undergrad student-to-faculty ratio of 10 to 1, it’s easy to see that the school is committed to helping their undergraduates succeed.
Read full report on General Materials Engineering at Lehigh University
University of California - San Diego came in at #10 in this year’s edition of the Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major ranking. UCSD is located in La Jolla, California and, has a large student population. In 2021-2022, this school awarded 26 masters’s materials processing and manufacturing degrees to qualified students.
With a freshman retention rate of 95%, the school does an excellent job of retaining its undergraduate students. The low undergrad student loan default rate of 0.6% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Full University of California - San Diego General Materials Engineering Report
University of Pennsylvania came in at #11 in this year’s edition of the Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major ranking. Philadelphia, Pennsylvania is the setting for this large institution of higher learning. The private not-for-profit school handed out masters’s materials processing and manufacturing degrees to 48 students in 2021-2022.
The undergrad student loan default rate at the school is 0.3%, which is quite low when compared to the national default rate of 10.1%. With a undergrad student-to-faculty ratio of 6 to 1, it’s easy to see that the school is committed to helping their undergraduates succeed. With a freshman retention rate of 98%, the school does an excellent job of retaining its undergraduate students.
Read full report on General Materials Engineering at UPenn
University of Dayton ranked #12 on this year’s Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major list. University of Dayton is located in Dayton, Ohio and, has a fairly large student population. In 2021-2022, this school awarded 20 masters’s materials processing and manufacturing degrees to qualified students.
The school has an excellent freshman retention rate of 88%, which means students like the school well enough to return for a second year. The school has an impressive undergrad student loan default rate. It’s only 0.5%, which is much lower than the national rate of 10.1%.
Read full report on General Materials Engineering at University of Dayton
With a ranking of #13, Alfred University did quite well on the 2023 Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major list. Located in Alfred, New York, this small private not-for-profit school awarded 3 diplomas to qualified masters’s materials processing and manufacturing students in 2021-2022.
The undergraduate student-to-faculty ratio of 9 to 1 is a sign that students will have more opportunities to engage with their professors one-on-one. The low undergrad student loan default rate of 3.3% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Full Alfred General Materials Engineering Report
With a ranking of #14, Northwestern University did quite well on the 2023 Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major list. This large school is located in Evanston, Illinois, and it awarded 21 masters’s materials processing and manufacturing degrees in 2021-2022.
With a undergrad student-to-faculty ratio of 6 to 1, it’s easy to see that the school is committed to helping their undergraduates succeed. The school has an excellent freshman retention rate of 99%, which means students like the school well enough to return for a second year. The undergrad student loan default rate at the school is 0.1%, which is quite low when compared to the national default rate of 10.1%.
Read more about General Materials Engineering at Northwestern University
Michigan Technological University ranked #15 on this year’s Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major list. Michigan Technological University is a public institution located in Houghton, Michigan. The school has a medium-sized population, and it awarded 9 masters’s degrees in 2021-2022.
With a freshman retention rate of 85%, the school does an excellent job of retaining its undergraduate students. The undergrad student loan default rate at the school is 0.9%, which is quite low when compared to the national default rate of 10.1%.
Full Michigan Technological University General Materials Engineering Report
University of Michigan - Ann Arbor did quite well in the 2023 Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major ranking, coming in at #16. U-M is a large public school situated in Ann Arbor, Michigan. It awarded 19 masters’s materials processing and manufacturing degrees in 2021-2022.
With a freshman retention rate of 97%, the school does an excellent job of retaining its undergraduate students. The school has an impressive undergrad student loan default rate. It’s only 0.2%, which is much lower than the national rate of 10.1%.
Full U-M General Materials Engineering Report
University of California - Merced did quite well in the 2023 Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major ranking, coming in at #17. UC Merced is located in Merced, California and, has a medium-sized student population. In 2021-2022, this school awarded 4 masters’s materials processing and manufacturing degrees to qualified students.
The low undergrad student loan default rate of 0.8% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Full UC Merced General Materials Engineering Report
Boston University did quite well in the 2023 Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major ranking, coming in at #18. Boston U is a large school located in Boston, Massachusetts that handed out 32 masters’s materials processing and manufacturing degrees in 2021-2022.
Students who start out at the school are likely to stick around. The freshman retention rate is 94%. The school has an impressive undergrad student loan default rate. It’s only 0.5%, which is much lower than the national rate of 10.1%.
Full Boston University General Materials Engineering Report
University of Washington - Seattle Campus came in at #19 in this year’s edition of the Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major ranking. This large school is located in Seattle, Washington, and it awarded 52 masters’s materials processing and manufacturing degrees in 2021-2022.
With a freshman retention rate of 93%, the school does an excellent job of retaining its undergraduate students. The school has an impressive undergrad student loan default rate. It’s only 0.7%, which is much lower than the national rate of 10.1%.
Read more about General Materials Engineering at UW Seattle
Wright State University - Main Campus did quite well in the 2023 Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major ranking, coming in at #20. Wright State University - Main Campus is located in Dayton, Ohio and, has a medium-sized student population. In 2021-2022, this school awarded 5 masters’s materials processing and manufacturing degrees to qualified students.
The low undergrad student loan default rate of 0.8% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Full Wright State University - Main Campus General Materials Engineering Report
Georgia Institute of Technology - Main Campus ranked #21 on this year’s Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major list. Georgia Institute of Technology - Main Campus is a large school located in Atlanta, Georgia that handed out 25 masters’s materials processing and manufacturing degrees in 2021-2022.
Students who start out at the school are likely to stick around. The freshman retention rate is 97%. The low undergrad student loan default rate of 0.4% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read more about General Materials Engineering at Georgia Tech
Rensselaer Polytechnic Institute did quite well in the 2023 Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major ranking, coming in at #22. RPI is located in Troy, New York and, has a medium-sized student population. In 2021-2022, this school awarded 9 masters’s materials processing and manufacturing degrees to qualified students.
Students who start out at the school are likely to stick around. The freshman retention rate is 89%. The school has an impressive undergrad student loan default rate. It’s only 0.5%, which is much lower than the national rate of 10.1%.
Full RPI General Materials Engineering Report
With a ranking of #23, Washington University in St Louis did quite well on the 2023 Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major list. This fairly large school is located in Saint Louis, Missouri, and it awarded 4 masters’s materials processing and manufacturing degrees in 2021-2022.
The undergraduate student-to-faculty ratio of 7 to 1 is a sign that students will have more opportunities to engage with their professors one-on-one. Students who start out at the school are likely to stick around. The freshman retention rate is 96%. The low undergrad student loan default rate of 0.4% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read more about General Materials Engineering at Washington University in St Louis
Massachusetts Institute of Technology came in at #24 in this year’s edition of the Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major ranking. Massachusetts Institute of Technology is a fairly large private not-for-profit school situated in Cambridge, Massachusetts. It awarded 5 masters’s materials processing and manufacturing degrees in 2021-2022.
The impressive undergraduate student-to-faculty ratio of 3 to 1 means that students may have more opportunities to work more closely with their professors than they would at other schools. With a freshman retention rate of 99%, the school does an excellent job of retaining its undergraduate students.
Full MIT General Materials Engineering Report
With a ranking of #25, Drexel University did quite well on the 2023 Schools for a Master’s Highly Focused on Materials Processing and Manufacturing Major list. Drexel University is located in Philadelphia, Pennsylvania and, has a large student population. In 2021-2022, this school awarded 11 masters’s materials processing and manufacturing degrees to qualified students.
The low undergrad student loan default rate of 0.9% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%. The undergraduate student-to-faculty ratio of 10 to 1 is a sign that students will have more opportunities to engage with their professors one-on-one. Students who start out at the school are likely to stick around. The freshman retention rate is 90%.
Read full report on General Materials Engineering at Drexel
