2023 Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region
14
Ranked Colleges
$29,600
Avg Cost*
With all of the options students have for higher education today, it can be tough to choose which direction to take. College Factual has developed its “Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region” ranking as one item you can use to help make this decision.
In 2021-2022, 3,476 people earned their degree in general materials engineering, making the major the 199th most popular in the United States.
Across the Southwest region, there were 373 general materials engineering graduates with average earnings and debt of $0 and $0 respectively.
This year’s “Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region” ranking analyzed 14 colleges that offered a degree in general materials engineering. This a ranking of the schools where the largest percentage of students has enrolled in general materials engineering.
Check out our ranking methodology for more information.
One Size Does Not Fit All
When choosing the right school for you, it’s important to arm yourself with all the facts you can. To that end, we’ve created a number of major-specific rankings, including this “Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region” list to help you make the college decision.
To further help you make the college decision, we’ve developed a unique tool called College Combat that allows you to compare schools based on the factors that matter the most to you. Go ahead and give it a try, or bookmark the link so you can check it out later.
Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region
The colleges and universities below are the best for southwest region materials processing and manufacturing students.
Top 14 Most Focused Colleges for General Materials Engineering in the Southwest Region
You’ll join some of the best and brightest minds around if you attend New Mexico Institute of Mining and Technology. The school came in at #1 for the Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region. New Mexico Institute of Mining and Technology is a small school located in Socorro, New Mexico that handed out 15 ’s materials processing and manufacturing degrees in 2021-2022.
The low undergrad student loan default rate of 1.7% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%. Since the school has a undergrad student-to-faculty ratio of 10 to 1, those pursuing a degree will have more opportunities to interact with their professors.
Read full report on General Materials Engineering at New Mexico Tech
Out of the 14 schools in the Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region that were part of this year’s ranking, Arizona State University - Tempe landed the #2 spot on the list. Arizona State University - Tempe is located in Tempe, Arizona and, has a large student population. In 2021-2022, this school awarded 82 ’s materials processing and manufacturing degrees to qualified students.
The undergrad student loan default rate at the school is 1.5%, which is quite low when compared to the national default rate of 10.1%. With a freshman retention rate of 86%, the school does an excellent job of retaining its undergraduate students.
Read full report on General Materials Engineering at Arizona State University - Tempe
You’ll join some of the best and brightest minds around if you attend University of North Texas. The school came in at #3 for the Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region. UNT is located in Denton, Texas and, has a large student population. In 2021-2022, this school awarded 49 ’s materials processing and manufacturing degrees to qualified students.
The low undergrad student loan default rate of 1.8% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read full report on General Materials Engineering at UNT
Out of the 14 schools in the Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region that were part of this year’s ranking, Texas A&M University - College Station landed the #4 spot on the list. College Station, Texas is the setting for this large institution of higher learning. The public school handed out ’s materials processing and manufacturing degrees to 109 students in 2021-2022.
The low undergrad student loan default rate of 0.6% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%. The school has an excellent freshman retention rate of 93%, which means students like the school well enough to return for a second year.
Full Texas A&M University - College Station General Materials Engineering Report
Out of the 14 schools in the Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region that were part of this year’s ranking, The University of Texas at Dallas landed the #5 spot on the list. UT Dallas is located in Richardson, Texas and, has a large student population. In 2021-2022, this school awarded 18 ’s materials processing and manufacturing degrees to qualified students.
The school has an excellent freshman retention rate of 88%, which means students like the school well enough to return for a second year. The undergrad student loan default rate at the school is 1.4%, which is quite low when compared to the national default rate of 10.1%.
Read full report on General Materials Engineering at The University of Texas at Dallas
The University of Texas at Arlington came in at #6 in this year’s edition of the Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region ranking. Arlington, Texas is the setting for this large institution of higher learning. The public school handed out ’s materials processing and manufacturing degrees to 17 students in 2021-2022.
The school has an impressive undergrad student loan default rate. It’s only 1.4%, which is much lower than the national rate of 10.1%.
Full UT Arlington General Materials Engineering Report
Texas State University did quite well in the 2023 Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region ranking, coming in at #7. San Marcos, Texas is the setting for this large institution of higher learning. The public school handed out ’s materials processing and manufacturing degrees to 8 students in 2021-2022.
The low undergrad student loan default rate of 2.0% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read more about General Materials Engineering at Texas State
Oklahoma State University - Main Campus came in at #8 in this year’s edition of the Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region ranking. Stillwater, Oklahoma is the setting for this large institution of higher learning. The public school handed out ’s materials processing and manufacturing degrees to 4 students in 2021-2022.
The school has an impressive undergrad student loan default rate. It’s only 1.2%, which is much lower than the national rate of 10.1%.
Read full report on General Materials Engineering at OSU
The University of Texas at El Paso did quite well in the 2023 Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region ranking, coming in at #9. El Paso, Texas is the setting for this large institution of higher learning. The public school handed out ’s materials processing and manufacturing degrees to 9 students in 2021-2022.
The undergrad student loan default rate at the school is 2.7%, which is quite low when compared to the national default rate of 10.1%.
Full UTEP General Materials Engineering Report
Arizona State University - Skysong did quite well in the 2023 Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region ranking, coming in at #10. Arizona State University - Skysong is located in Scottsdale, Arizona and, has a large student population. In 2021-2022, this school awarded 24 ’s materials processing and manufacturing degrees to qualified students.
The low undergrad student loan default rate of 1.5% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read full report on General Materials Engineering at ASU - Skysong
The University of Texas at Austin ranked #11 on this year’s Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region list. UT Austin is located in Austin, Texas and, has a large student population. In 2021-2022, this school awarded 14 ’s materials processing and manufacturing degrees to qualified students.
With a freshman retention rate of 96%, the school does an excellent job of retaining its undergraduate students. The undergrad student loan default rate at the school is 0.8%, which is quite low when compared to the national default rate of 10.1%.
Read more about General Materials Engineering at The University of Texas at Austin
With a ranking of #12, The University of Texas at San Antonio did quite well on the 2023 Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region list. The University of Texas at San Antonio is a public institution located in San Antonio, Texas. The school has a large population, and it awarded 3 ’s degrees in 2021-2022.
The school has an impressive undergrad student loan default rate. It’s only 1.4%, which is much lower than the national rate of 10.1%.
Full The University of Texas at San Antonio General Materials Engineering Report
El Paso Community College came in at #13 in this year’s edition of the Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region ranking. Located in El Paso, Texas, this large public school awarded 1 degrees to qualified ’s materials processing and manufacturing students in 2021-2022.
The low undergrad student loan default rate of 3.5% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read more about General Materials Engineering at El Paso Community College
University of Houston ranked #14 on this year’s Schools Highly Focused on Materials Processing and Manufacturing Major in the Southwest Region list. This large school is located in Houston, Texas, and it awarded 20 ’s materials processing and manufacturing degrees in 2021-2022.
With a freshman retention rate of 85%, the school does an excellent job of retaining its undergraduate students. The school has an impressive undergrad student loan default rate. It’s only 0.5%, which is much lower than the national rate of 10.1%.
Full University of Houston General Materials Engineering Report
Switch to a Different Ranking Method
Notes and References
References
- The Integrated Postsecondary Education Data System (IPEDS) from the National Center for Education Statistics (NCES), a branch of the U.S. Department of Education (DOE) serves as the core of our data about colleges.
- Some other college data, including much of the graduate earnings data, comes from the U.S. Department of Education’s (College Scorecard).
- Information about the national average student loan default rate is from the U.S. Department of Education and refers to data about the 2016 borrower cohort tracking period for which the cohort default rate (CDR) was 10.1%.
Read more about our data sources and methodologies
- *Avg Salary and Avg 4-Year Grad Rate are for the top schools only.
- Some schools otherwise deserving of recognition may have been removed from this ranking in the event that new data identified post-publication warranted it, or at the request of the school.
Credits
