18
Ranked Colleges
68
Degrees Awarded
When it comes to choosing a college, students have a lot of options - but not all of them are good. Our mission at College Factual is to arm you with as much information as we can to help you make that decision. Our “Schools for an Associate Highly Focused on Sheet Metal Tech Major” ranking is one tool we have developed to help in this regard.
Sheet Metal Technology/Sheetworking is the 1079th most popular major in the country with 319 degrees awarded in 2021-2022.
At the associate degree level specifically, there were 68 sheet metal technology/sheetworking graduates with average earnings and debt of $36,431 and $15,731 respectively.
For this year’s “Schools for an Associate Highly Focused on Sheet Metal Tech Major” ranking, we looked at 18 colleges that offer a degree in sheet metal technology/sheetworking. That schools that top this list have a program in sheet metal technology/sheetworking in which the largest percentage of students at the school are enrolled.
For more information, check out our ranking methodology.
One Size Does Not Fit All
Since picking the right college can be one of the most important decisions of your life, we’ve developed the “Schools for an Associate Highly Focused on Sheet Metal Tech Major” ranking, along with many other major-related rankings, to help you make that decision.
To further help you make the college decision, we’ve developed a unique tool called College Combat that allows you to compare schools based on the factors that matter the most to you. Go ahead and give it a try, or bookmark the link so you can check it out later.
The following schools top our list of the Best “Schools for an Associate Highly Focused on Sheet Metal Tech Major”.
Out of the 18 schools in the Schools for an Associate Highly Focused on Sheet Metal Tech Major that were part of this year’s ranking, Bates Technical College landed the #1 spot on the list. Tacoma, Washington is the setting for this small institution of higher learning. The public school handed out associates’s sheet metal tech degrees to 3 students in 2021-2022.
The school has an impressive undergrad student loan default rate. It’s only 3.4%, which is much lower than the national rate of 10.1%.
Read full report on Sheet Metal Technology/Sheetworking at Bates Technical College
You’ll join some of the best and brightest minds around if you attend Butler Community College. The school came in at #2 for the Schools for an Associate Highly Focused on Sheet Metal Tech Major. Butler Community College is a public institution located in El Dorado, Kansas. The school has a medium-sized population, and it awarded 0 associates’s degrees in 2021-2022.
The school has an impressive undergrad student loan default rate. It’s only 2.0%, which is much lower than the national rate of 10.1%.
Read full report on Sheet Metal Technology/Sheetworking at Butler Community College
You’ll join some of the best and brightest minds around if you attend Long Beach City College. The school came in at #3 for the Schools for an Associate Highly Focused on Sheet Metal Tech Major. Long Beach City College is a large school located in Long Beach, California that handed out 11 associates’s sheet metal tech degrees in 2021-2022.
Full Long Beach City College Sheet Metal Technology/Sheetworking Report
You’ll be in good company if you decide to attend Ivy Tech Community College. It ranked #4 on our 2023 Schools for an Associate Highly Focused on Sheet Metal Tech Major list. Ivy Tech Community College is a large public school situated in Indianapolis, Indiana. It awarded 47 associates’s sheet metal tech degrees in 2021-2022.
The undergrad student loan default rate at the school is 3.5%, which is quite low when compared to the national default rate of 10.1%.
Read more about Sheet Metal Technology/Sheetworking at Ivy Tech Community College
You’ll join some of the best and brightest minds around if you attend Vincennes University. The school came in at #5 for the Schools for an Associate Highly Focused on Sheet Metal Tech Major. This fairly large school is located in Vincennes, Indiana, and it awarded 0 associates’s sheet metal tech degrees in 2021-2022.
The undergrad student loan default rate at the school is 4.3%, which is quite low when compared to the national default rate of 10.1%.
Full Vincennes University Sheet Metal Technology/Sheetworking Report
American River College landed the #6 spot on the 2023 Schools for an Associate Highly Focused on Sheet Metal Tech Major ranking. American River is a public institution located in Sacramento, California. The school has a large population, and it awarded 1 associates’s degrees in 2021-2022.
The low undergrad student loan default rate of 3.7% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read full report on Sheet Metal Technology/Sheetworking at American River
San Diego City College came in at #7 in this year’s edition of the Schools for an Associate Highly Focused on Sheet Metal Tech Major ranking. San Diego, California is the setting for this fairly large institution of higher learning. The public school handed out associates’s sheet metal tech degrees to 0 students in 2021-2022.
Read full report on Sheet Metal Technology/Sheetworking at San Diego City College
Lake Superior College landed the #7 spot on the 2023 Schools for an Associate Highly Focused on Sheet Metal Tech Major ranking. This small school is located in Duluth, Minnesota, and it awarded 0 associates’s sheet metal tech degrees in 2021-2022.
The school has an impressive undergrad student loan default rate. It’s only 1.6%, which is much lower than the national rate of 10.1%.
Read full report on Sheet Metal Technology/Sheetworking at LSC
Palomar College landed the #7 spot on the 2023 Schools for an Associate Highly Focused on Sheet Metal Tech Major ranking. Located in San Marcos, California, this fairly large public school handed out 10 diplomas to qualified associates’s sheet metal tech students in 2021-2022.
Read full report on Sheet Metal Technology/Sheetworking at Palomar College
Community College of Allegheny County did quite well in the 2023 Schools for an Associate Highly Focused on Sheet Metal Tech Major ranking, coming in at #7. Community College of Allegheny County is a public institution located in Pittsburgh, Pennsylvania. The school has a fairly large population, and it awarded 20 associates’s degrees in 2021-2022.
The undergrad student loan default rate at the school is 3.2%, which is quite low when compared to the national default rate of 10.1%.
Full Community College of Allegheny County Sheet Metal Technology/Sheetworking Report
Saint Paul College did quite well in the 2023 Schools for an Associate Highly Focused on Sheet Metal Tech Major ranking, coming in at #7. Saint Paul College is a medium-sized public school situated in Saint Paul, Minnesota. It awarded 2 associates’s sheet metal tech degrees in 2021-2022.
The low undergrad student loan default rate of 3.4% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read more about Sheet Metal Technology/Sheetworking at Saint Paul College
Southwestern Illinois College landed the #7 spot on the 2023 Schools for an Associate Highly Focused on Sheet Metal Tech Major ranking. Belleville, Illinois is the setting for this medium-sized institution of higher learning. The public school handed out associates’s sheet metal tech degrees to 7 students in 2021-2022.
Read more about Sheet Metal Technology/Sheetworking at Southwestern Illinois College
Honolulu Community College came in at #7 in this year’s edition of the Schools for an Associate Highly Focused on Sheet Metal Tech Major ranking. Honolulu CC is a small school located in Honolulu, Hawaii that handed out 15 associates’s sheet metal tech degrees in 2021-2022.
The low undergrad student loan default rate of 4.4% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read full report on Sheet Metal Technology/Sheetworking at Honolulu CC
With a ranking of #7, College of Southern Nevada did quite well on the 2023 Schools for an Associate Highly Focused on Sheet Metal Tech Major list. This large school is located in Las Vegas, Nevada, and it awarded 1 associates’s sheet metal tech degrees in 2021-2022.
The undergrad student loan default rate at the school is 3.6%, which is quite low when compared to the national default rate of 10.1%.
Read more about Sheet Metal Technology/Sheetworking at College of Southern Nevada
Columbus State Community College landed the #7 spot on the 2023 Schools for an Associate Highly Focused on Sheet Metal Tech Major ranking. Located in Columbus, Ohio, this large public school handed out 0 diplomas to qualified associates’s sheet metal tech students in 2021-2022.
The undergrad student loan default rate at the school is 3.3%, which is quite low when compared to the national default rate of 10.1%.
Read full report on Sheet Metal Technology/Sheetworking at Columbus State Community College
With a ranking of #7, Foothill College did quite well on the 2023 Schools for an Associate Highly Focused on Sheet Metal Tech Major list. Foothill College is a public institution located in Los Altos Hills, California. The school has a fairly large population, and it awarded 1 associates’s degrees in 2021-2022.
The undergrad student loan default rate at the school is 3.7%, which is quite low when compared to the national default rate of 10.1%.
Read full report on Sheet Metal Technology/Sheetworking at Foothill College
With a ranking of #7, Delta College did quite well on the 2023 Schools for an Associate Highly Focused on Sheet Metal Tech Major list. Delta College is a medium-sized public school situated in University Center, Michigan. It awarded 0 associates’s sheet metal tech degrees in 2021-2022.
The low undergrad student loan default rate of 4.3% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read full report on Sheet Metal Technology/Sheetworking at Delta College
GateWay Community College ranked #7 on this year’s Schools for an Associate Highly Focused on Sheet Metal Tech Major list. GateWay Community College is a small public school situated in Phoenix, Arizona. It awarded 0 associates’s sheet metal tech degrees in 2021-2022.
The low undergrad student loan default rate of 2.4% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read more about Sheet Metal Technology/Sheetworking at GateWay Community College
Switch to a Different Ranking Method
Notes and References
References
- The Integrated Postsecondary Education Data System (IPEDS) from the National Center for Education Statistics (NCES), a branch of the U.S. Department of Education (DOE) serves as the core of our data about colleges.
- Some other college data, including much of the graduate earnings data, comes from the U.S. Department of Education’s (College Scorecard).
- Information about the national average student loan default rate is from the U.S. Department of Education and refers to data about the 2016 borrower cohort tracking period for which the cohort default rate (CDR) was 10.1%.
Read more about our data sources and methodologies
- *Avg Salary and Avg 4-Year Grad Rate are for the top schools only.
- Some schools otherwise deserving of recognition may have been removed from this ranking in the event that new data identified post-publication warranted it, or at the request of the school.
