22
Ranked Colleges
187
Degrees Awarded
$17,300
Avg Cost*
When it comes to choosing a college, students have a lot of options - but not all of them are good. One of our goals at College Factual is to give you as much information as we can - such as our “Schools for an Associate Highly Focused on Tool and Die Tech Major” ranking - to help you make that decision.
In 2021-2022, 541 people earned their degree in tool & die technology/technician, making the major the 810th most popular in the United States.
At the associate degree level specifically, there were 187 tool & die technology/technician graduates with average earnings and debt of $36,431 and $15,731 respectively.
For this year’s “Schools for an Associate Highly Focused on Tool and Die Tech Major” ranking, we looked at 22 colleges that offer a degree in tool & die technology/technician. That schools that top this list have a program in tool & die technology/technician in which the largest percentage of students at the school are enrolled.
For more information, check out our ranking methodology.
One Size Does Not Fit All
The tool and die tech school you choose to invest your time and money in matters. To help you make the decision that is right for you, we’ve developed a number of major-specific rankings, including this list of “Schools for an Associate Highly Focused on Tool and Die Tech Major”.
In addition to our rankings, you can take two colleges and compare them based on the criteria that matters most to you in our unique tool, College Combat. If you’re torn between two schools, you can use it to help you see how they stack up against one another. Bookmark it so you can compare any new schools that might interest you.
The following schools top our list of the Best “Schools for an Associate Highly Focused on Tool and Die Tech Major”.
Out of the 22 schools in the Schools for an Associate Highly Focused on Tool and Die Tech Major that were part of this year’s ranking, Mech-Tech College landed the #1 spot on the list. Mech-Tech College is located in Caguas, Puerto Rico and, has a small student population. In 2021-2022, this school awarded 29 associates’s tool and die tech degrees to qualified students.
The undergrad student loan default rate at the school is 0.6%, which is quite low when compared to the national default rate of 10.1%.
Read full report on Tool & Die Technology/Technician at Mech-Tech College
Out of the 22 schools in the Schools for an Associate Highly Focused on Tool and Die Tech Major that were part of this year’s ranking, Vincennes University landed the #2 spot on the list. Vincennes University is located in Vincennes, Indiana and, has a fairly large student population. In 2021-2022, this school awarded 36 associates’s tool and die tech degrees to qualified students.
The school has an impressive undergrad student loan default rate. It’s only 4.3%, which is much lower than the national rate of 10.1%.
Read full report on Tool & Die Technology/Technician at Vincennes University
You’ll be in good company if you decide to attend Gadsden State Community College. It ranked #3 on our 2023 Schools for an Associate Highly Focused on Tool and Die Tech Major list. Located in Gadsden, Alabama, this small public school handed out 18 diplomas to qualified associates’s tool and die tech students in 2021-2022.
Full Gadsden State Community College Tool & Die Technology/Technician Report
Out of the 22 schools in the Schools for an Associate Highly Focused on Tool and Die Tech Major that were part of this year’s ranking, Shelton State Community College landed the #4 spot on the list. Located in Tuscaloosa, Alabama, this small public school awarded 13 degrees to qualified associates’s tool and die tech students in 2021-2022.
Full Shelton State Community College Tool & Die Technology/Technician Report
You’ll join some of the best and brightest minds around if you attend Monroe Community College. The school came in at #5 for the Schools for an Associate Highly Focused on Tool and Die Tech Major. Located in Rochester, New York, this medium-sized public school awarded 15 diplomas to qualified associates’s tool and die tech students in 2021-2022.
Read full report on Tool & Die Technology/Technician at Monroe Community College
Wallace State Community College, Hanceville ranked #6 on this year’s Schools for an Associate Highly Focused on Tool and Die Tech Major list. Wallace State Community College, Hanceville is located in Hanceville, Alabama and, has a medium-sized student population. In 2021-2022, this school awarded 14 associates’s tool and die tech degrees to qualified students.
The undergrad student loan default rate at the school is 2.6%, which is quite low when compared to the national default rate of 10.1%.
Read more about Tool & Die Technology/Technician at Wallace State, Hanceville
Bevill State Community College came in at #7 in this year’s edition of the Schools for an Associate Highly Focused on Tool and Die Tech Major ranking. Located in Jasper, Alabama, this small public school handed out 10 degrees to qualified associates’s tool and die tech students in 2021-2022.
Read full report on Tool & Die Technology/Technician at Bevill State Community College
North Iowa Area Community College came in at #8 in this year’s edition of the Schools for an Associate Highly Focused on Tool and Die Tech Major ranking. Located in Mason City, Iowa, this small public school awarded 7 diplomas to qualified associates’s tool and die tech students in 2021-2022.
Full North Iowa Area Community College Tool & Die Technology/Technician Report
With a ranking of #9, Marshalltown Community College did quite well on the 2023 Schools for an Associate Highly Focused on Tool and Die Tech Major list. Located in Marshalltown, Iowa, this small public school handed out 1 diplomas to qualified associates’s tool and die tech students in 2021-2022.
The school has an impressive undergrad student loan default rate. It’s only 3.4%, which is much lower than the national rate of 10.1%.
Read more about Tool & Die Technology/Technician at Marshalltown Community College
With a ranking of #10, Ferris State University did quite well on the 2023 Schools for an Associate Highly Focused on Tool and Die Tech Major list. Big Rapids, Michigan is the setting for this fairly large institution of higher learning. The public school handed out associates’s tool and die tech degrees to 15 students in 2021-2022.
The low undergrad student loan default rate of 1.6% is a good sign that students have an easier time paying off their loans than they might at other schools. For comparison, the national default rate is 10.1%.
Read more about Tool & Die Technology/Technician at Ferris State University
Des Moines Area Community College came in at #11 in this year’s edition of the Schools for an Associate Highly Focused on Tool and Die Tech Major ranking. DMACC is a large public school situated in Ankeny, Iowa. It awarded 14 associates’s tool and die tech degrees in 2021-2022.
The undergrad student loan default rate at the school is 2.6%, which is quite low when compared to the national default rate of 10.1%.
Full Des Moines Area Community College Tool & Die Technology/Technician Report
With a ranking of #12, Alpena Community College did quite well on the 2023 Schools for an Associate Highly Focused on Tool and Die Tech Major list. Alpena Community College is located in Alpena, Michigan and, has a small student population. In 2021-2022, this school awarded 2 associates’s tool and die tech degrees to qualified students.
Read more about Tool & Die Technology/Technician at Alpena Community College
South Texas College did quite well in the 2023 Schools for an Associate Highly Focused on Tool and Die Tech Major ranking, coming in at #13. South Texas College is a large school located in McAllen, Texas that handed out 8 associates’s tool and die tech degrees in 2021-2022.
Full South Texas College Tool & Die Technology/Technician Report
Delta College came in at #14 in this year’s edition of the Schools for an Associate Highly Focused on Tool and Die Tech Major ranking. This medium-sized school is located in University Center, Michigan, and it awarded 3 associates’s tool and die tech degrees in 2021-2022.
The undergrad student loan default rate at the school is 4.3%, which is quite low when compared to the national default rate of 10.1%.
Full Delta College Tool & Die Technology/Technician Report
Hennepin Technical College ranked #15 on this year’s Schools for an Associate Highly Focused on Tool and Die Tech Major list. Hennepin Technical College is a small public school situated in Brooklyn Park, Minnesota. It awarded 4 associates’s tool and die tech degrees in 2021-2022.
The school has an impressive undergrad student loan default rate. It’s only 3.9%, which is much lower than the national rate of 10.1%.
Full Hennepin Technical College Tool & Die Technology/Technician Report
Lakeland Community College did quite well in the 2023 Schools for an Associate Highly Focused on Tool and Die Tech Major ranking, coming in at #16. Lakeland is a small public school situated in Kirtland, Ohio. It awarded 0 associates’s tool and die tech degrees in 2021-2022.
With a undergrad student-to-faculty ratio of 10 to 1, it’s easy to see that the school is committed to helping their undergraduates succeed. The undergrad student loan default rate at the school is 3.9%, which is quite low when compared to the national default rate of 10.1%.
Full Lakeland Tool & Die Technology/Technician Report
Guilford Technical Community College did quite well in the 2023 Schools for an Associate Highly Focused on Tool and Die Tech Major ranking, coming in at #16. Guilford Technical Community College is a fairly large public school situated in Jamestown, North Carolina. It awarded 0 associates’s tool and die tech degrees in 2021-2022.
Full Guilford Technical Community College Tool & Die Technology/Technician Report
Ivy Tech Community College did quite well in the 2023 Schools for an Associate Highly Focused on Tool and Die Tech Major ranking, coming in at #16. This large school is located in Indianapolis, Indiana, and it awarded 0 associates’s tool and die tech degrees in 2021-2022.
The school has an impressive undergrad student loan default rate. It’s only 3.5%, which is much lower than the national rate of 10.1%.
Read full report on Tool & Die Technology/Technician at Ivy Tech Community College
Alamance Community College did quite well in the 2023 Schools for an Associate Highly Focused on Tool and Die Tech Major ranking, coming in at #16. This small school is located in Graham, North Carolina, and it awarded 0 associates’s tool and die tech degrees in 2021-2022.
Read full report on Tool & Die Technology/Technician at ACC
J. F. Drake State Community and Technical College landed the #16 spot on the 2023 Schools for an Associate Highly Focused on Tool and Die Tech Major ranking. Drake State is a small public school situated in Huntsville, Alabama. It awarded 0 associates’s tool and die tech degrees in 2021-2022.
Read full report on Tool & Die Technology/Technician at Drake State
Itawamba Community College did quite well in the 2023 Schools for an Associate Highly Focused on Tool and Die Tech Major ranking, coming in at #16. Itawamba Community College is located in Fulton, Mississippi and, has a small student population. In 2021-2022, this school awarded 0 associates’s tool and die tech degrees to qualified students.
The undergrad student loan default rate at the school is 4.8%, which is quite low when compared to the national default rate of 10.1%.
Full Itawamba Community College Tool & Die Technology/Technician Report
Prairie State College came in at #16 in this year’s edition of the Schools for an Associate Highly Focused on Tool and Die Tech Major ranking. Prairie State College is a small public school situated in Chicago Heights, Illinois. It awarded 0 associates’s tool and die tech degrees in 2021-2022.
Since the school has a undergrad student-to-faculty ratio of 10 to 1, those pursuing a degree will have more opportunities to interact with their professors.
Read full report on Tool & Die Technology/Technician at Prairie State College
Switch to a Different Ranking Method
Notes and References
References
- The Integrated Postsecondary Education Data System (IPEDS) from the National Center for Education Statistics (NCES), a branch of the U.S. Department of Education (DOE) serves as the core of our data about colleges.
- Some other college data, including much of the graduate earnings data, comes from the U.S. Department of Education’s (College Scorecard).
- Information about the national average student loan default rate is from the U.S. Department of Education and refers to data about the 2016 borrower cohort tracking period for which the cohort default rate (CDR) was 10.1%.
Read more about our data sources and methodologies
- *Avg Salary and Avg 4-Year Grad Rate are for the top schools only.
- Some schools otherwise deserving of recognition may have been removed from this ranking in the event that new data identified post-publication warranted it, or at the request of the school.